www.icesr.com
IT运维工程师的摇篮

vmware esxi 5.5安装intel 82579 网卡驱动

vmware esxi 5.5安装intel 82579 网卡驱动
net-e1000e-2.1.4.x86_64.vib下载:

先将esxi主机开启SSH服务器,打开CRT连接工具连接到esxi命令模式界面,再将网卡驱动文件net-e1000e-2.1.4.x86_64.vib拷贝到/tmp/目录下面
执行如下命令安装:

/>esxcli software vib install -v /tmp/net-e1000e-2.1.4.x86_64.vib

安装报错如下:
[DependencyError]
VIB daoyama_bootbank_net-e1000e_2.1.4’s acceptance level is community, which is not compliant with the ImageProfile acceptance level partner
To change the host acceptance level, use the ‘esxcli software acceptance set’ command.
Please refer to the log file for more details.
#
#
#
安装解决方法:
第一步:执行esxcli system maintenanceMode set -e true -t 0

/>esxcli system maintenanceMode set -e true -t 0
Maintenance mode is already enabled.

第二步:执行esxcli software acceptance set –level=CommunitySupported

/>esxcli software acceptance set –level=CommunitySupported
Host acceptance level changed to ‘CommunitySupported’.

第三步:执行esxcli software vib install -v /tmp/net-e1000e-2.1.4.x86_64.vib

/>esxcli software vib install -v /tmp/net-e1000e-2.1.4.x86_64.vib
Installation Result
Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
Reboot Required: true
VIBs Installed: daoyama_bootbank_net-e1000e_2.1.4
VIBs Removed: VMware_bootbank_net-e1000e_1.1.2-4vmw.550.1.15.1623387
VIBs Skipped:

第四步:执行esxcli system maintenanceMode set -e false -t 0

/>esxcli system maintenanceMode set -e false -t 0

最后重启即可!

/> reboot

未经允许不得转载:冰点网络 » vmware esxi 5.5安装intel 82579 网卡驱动

分享到:更多 ()

评论 1

评论前必须登录!

 

  1. #1

    好文章,内容一针见血.

    匿名4年前 (2015-03-23)